Versa Systems // Genesis Icesa

Versa Systems

These workcell platforms focus on flexibility, ease to use, high performance and low cost pre-engineered cells. Using Genesis’ patented, center-mounted robot design, Versa Systems maximizes utilization of the robot’s work envelope by placing the robot in the center of the turntable and closer to the workpiece.

  • Versa 3M — Flat 180-degree indexing turntable with pneumatic drive and rear mounted robot(s)
  • Versa RCTL — Flat 180-degree indexing turntable with pneumatic drive and center mounted robot(s)
  • Versa RCTL XM — Flat 180-degree indexing turntable with pneumatic drive and center mounted robot(s). Can satisfy higher weight capacities than the Versa RCTL
  • Versa 3M3 — Three axis indexing turntable with pneumatic main drive and servo minors with rear mounted robot(s).
  • Versa RC3L — Three axis indexing turntable with pneumatic main drive and servo minors with center mounted robot(s).
  • Versa RC3L XM — Three axis indexing turntable with pneumatic main drive and servo minors with center mounted robot(s). Can satisfy higher weight capacities than the Versa RC3L
  • Versa 2 — Opposing stations with servo auxiliary axis and robot(s) mounted in between the weld station
  • Versa 2H — Opposing stations with servo auxiliary axis and robot(s) mounted in between the weld station. Can satisfy higher weight capacities than the Versa 2.
  • Versa 4M — Ferris wheel with pneumatic drive and servo minor auxiliary axis. Robot(s) mounted behind positioner or overhead on mezzanine.